Variable Frequency Drives for Async Injection Molding Machine
1. Information of Product Model
ES101 Series Variable Frequency Drives are cabinet-type drives, and hence can be located directly on the ground. The cabinet inside is equipped with mains frequency and variable frequency switch contactor. Working status of mains frequency and variable frequency can be manually switched by the key rotary switch on cabinet panel.
The cabinet inside is equipped with analog sampling interface card EPC-IM1 dedicated for injection molding machine.
2. Table 1 shows ES101 Series Variable Frequency Drives model and technical data.
Table 1 Product model and technical data
Model
|
Power Rating(kW)
|
Rated Output Current (A)
|
Rated Input current (A)
|
Applicable motor (kW)
|
ES101-4T11B
|
11
|
24
|
29
|
11
|
ES101-4T15B
|
15
|
30
|
35
|
15
|
ES101-4T18.5
|
18.5
|
39
|
44
|
18.5
|
ES101-4T18.5B
|
18.5
|
39
|
44
|
18.5
|
ES101-4T22
|
22
|
45
|
50
|
22
|
ES101-4T22B
|
22
|
45
|
50
|
22
|
ES101-4T30
|
30
|
60
|
65
|
30
|
ES101-4T30B
|
30
|
60
|
65
|
30
|
ES101-4T37
|
37
|
75
|
80
|
37
|
ES101-4T37B
|
37
|
75
|
80
|
37
|
ES101-4T45
|
45
|
91
|
95
|
45
|
ES101-4T45B
|
45
|
91
|
95
|
45
|
ES101-4T55
|
55
|
112
|
118
|
55
|
ES101-4T55B
|
55
|
112
|
118
|
55
|
ES101-4T75
|
75
|
150
|
157
|
75
|
ES101-4T75B
|
75
|
150
|
157
|
75
|
3. Technical Features of ES101 Variable Frequency Drives
Table 2 Technical features
Power input
|
Rated input voltage
|
3-phase AC208V/AC220V/AC230V/AC240V/AC380V/AC400V/AC415V/AC440V/AC460V/AC480V
|
Rated input current
|
See Section 2.3
|
Frequency
|
50Hz/60Hz, tolerance ±5%
|
Allowable range of voltage
|
Continuous voltage fluctuation ±10%, short fluctuation -15%~+10%, i.e. 323V~528V;
|
Voltage out-of-balance rate <3%, distortion rate as per the requirements of IEC61800-2
|
Power output
|
Applicable motor (kW)
|
See Section 2.3
|
Rated current (A)
|
See Section 2.3
|
Output voltage (V)
|
3-phase: 0~ rated input voltage, error < ±3%
|
Output frequency (Hz)
|
0.00~ 600.00Hz; unit: 0.01Hz
|
Overload capacity
|
150% - 1min; 180% - 10s; 200% - 0.5s
|
Control characteristics
|
V/f patterns
|
V/f control
|
Sensor-less vector control 1
|
Sensor-less vector control 2
|
Close-loop vector control
|
Speed range
|
1:100 (V/f control, sensor-less vector control 1)
|
1:200 (sensor-less vector control 2)
|
1:1000 (close-loop vector control)
|
Speed accuracy
|
±0.5% (V/f control)
|
±0.2% (sensor-less vector control 1 & 2)
|
±0.02% (close-loop vector control)
|
Speed fluctuation
|
±0.3% (sensor-less vector control 1 & 2)
|
±0.1% (close-loop vector control)
|
Torque response
|
< 10ms (sensor-less vector control 1 & 2)
|
< 5ms (close-loop vector control)
|
Torque control accuracy
|
±7.5% (sensor-less vector control 2)
|
±5% (close-loop vector control)
|
Starting torque
|
0.5Hz: 180% (V/f control, sensor-less vector control 1)
|
0.25Hz: 180% (sensor-less vector control 2)
|
0Hz: 200% (close-loop vector control)
|
Basic functions
|
Start frequency
|
0.00~ 600.00Hz
|
Accel/Decel time
|
0.00~60000s
|
Carrier frequency
|
0.7kHz~16kHz
|
Frequency command sources
|
Digital setting + keypad ∧/∨
|
Digital setting + terminal UP/DOWN
|
Communication
|
Analog setting (AI1/AI2/AI3)
|
Terminal pulse setting
|
Motor started methods
|
Started from starting frequency
|
DC brake then started
|
Speed search started
|
Motor stopped methods
|
Ramp to stop
|
Coast to stop
|
Ramp to stop + DC brake
|
Basic functions
|
Dynamic brake capacity
|
Brake unit threshold voltage: 650V~750V; service time: 0.0~100.0s;
|
DC brake capacity
|
DC brake start frequency: 0.00~600.00Hz
|
DC brake current: 0.0~100.0%
|
DC brake time: 0.0~30.00s
|
Input terminals
|
7 digital inputs, one of which can be used for high-speed pulse input. Compatible with active open collectors NPN, PNP and dry contact input.
|
3 analog inputs, one of which supports voltage input only, and the other two are voltage/current programmable.
|
Output terminals
|
One high-speed pulse output terminal, 0~50kHz square signal; can output command frequency, output frequency and so forth
|
One digital output terminal
|
Two relay output terminals
|
Two analog output terminal, voltage/current programmable; can output command frequency, output frequency and so forth
|
Encoder signal terminal
|
Compatible with 5V/12V encoder
|
Compatible with different types of encoder signal input, such as open collector, push-pull and differential, etc.
|
Protection function
|