Low Voltage Three Phase Shunt Capacitor

General Description

CMKP Low Voltage Three Phase Shunt Compensation Power Capacitor are packaged in a one-time stretched aluminum shell, which is safe and free of pollution.

Structure

● Packed in a one-time stretch aluminum case;

● Pollution-free;

● Built-in overvoltage device and discharge resistor;

● The capacitor element is made of high-quality high-temperature metallized polypropylene film;

● The component uses a large-diameter mandrel, which greatly improves the voltage resistance;

● The bottom of the capacitor is the mounting screw of M12 (or M16), which does not need to be grounded.

Working conditions

● Altitude: ≤2000m;

● Ambient temperature category: -25 / C (min. temperature -25 ° C, max. temperature 50 °C, average temperature within 24 hours does not exceed 40 ° C, annual average temperature does not exceed 30 ° C) Capacitors should work in well-ventilated conditions;

● Ambient humidity: ≤90%;

● After the capacitor is cut off from the power supply, it must be ensured that the capacitor voltage drops to 10% of the rated voltage before it can be put into operation again. Usually this time is 180 seconds. Therefore, a controller with a delay input function should be selected. For zero potential switching The controller can be exempt from this limitation.

Model Description

Main Model

http://www.zhiyuele.com/